Automatic Home Appliances Remote control electrical appliances Setting up IR sensor connection to Atmega 328P is very simple. Beside VCC and GND pin , the sensor has only one output pin that should be connected to one of digital pins of the Atmega 328P. HC - 05 has red LED which indicates connection status, whether the Bluetooth is connected or not. Before connecting to HC - 05 module this red LED blinks continuously in a periodic manner. When it gets connected to any other Bluetooth device, its blinking slows down to two seconds. This module works on 3.3 V - 6V but you can use only 5V DC. this module use any Serial AMS1117 is a popular SMD package 3-pin voltage regulator that is available in many models for fixed and adjustable voltage requirements. The IC can deliver a maximum current of 1A and the output voltage can vary from 1.5V to 5V. It also has a low drop out voltage of 1.3V when operating at maximum current. pin number 1 GND, pin 2 OUTPUT,
All about Electronics, Radio frequency, RC transmitter,FM transmitter, Circuit Diagram, raspberry Pi project, Drone, Plane, Science Discovery, c++, etc.